7 Tricks To Help Make The Most Of Your Ghost Immobiliser

Why You Need a Ghost 2 Immobiliser Fitting Near Me

Modern thieves can rob a car in under a minute. They use the cars OBD port to hack into the ECU and then duplicate a new key, all using a hidden laptop in the car.

The Autowatch Ghost immobiliser prevents this by sending pin codes to buttons on your vehicle (steering wheels and central console). It is completely unnoticeable to anyone inside your vehicle.

There are no key fobs or LED indications to give away its location

The ghost immobiliser is the most effective way to prevent keyless entry theft and key cloning. This device protects your vehicle from these types of attacks by preventing the engine from running after the valid pin code has been entered. This is a highly efficient method of protecting your vehicle, and insurance companies see it as a security measure that can reduce the cost of your insurance.

The way in which the ghost works is by connecting to your vehicle's CAN data network. Once installed by us at Car Theft Solutions it will only begin when you press a specific button sequence using your unique override code. The engine will not begin when you attempt to start your vehicle without the code. The criminal will realize that they've been caught and will likely to get out of the vehicle and escape.

This system has the benefit of not transmitting any signals like a tracker. Thieves can't make use of RF receivers to pinpoint your Ghost device's location. It also doesn't send out any IR (infrared) signals like the standard remote key fobs to control the device or tracker do, which makes it difficult to deceive or hack.

Another benefit of the ghost is that it has the valet mode which can be activated when you give your vehicle to valet parking or for servicing. This will turn off the immobiliser on the CAN for 30mph and allow you to use the vehicle in normal mode using your key fob or phone app. The Ghost will be fully functional when the vehicle is returned to its parked position.

Car Theft Solutions is the place to contact If you'd like to learn more about Ghost or should you wish to have it installed in your vehicle. We are a family-owned company with more than 10 years of experience in vehicle security. This includes the Ghost immobiliser installation. We are a Thatcham approved installer of Ghost products and have built our name on the basis of customer satisfaction.

No hacking, cloning or modifying

The Autowatch Ghost immobiliser is one of the most advanced models on the market. It protects your vehicle from key cloning and hacking which makes it almost impossible to take. The only way that a burglar could steal your car is physically towing it away & even then they would not be able to start the engine.

This is because unlike other immobilisers that stop your car from starting if you do not have your fob, this innovative system actually cuts off the engine control unit, ensuring that the vehicle is unable to start. It works by sending a signal to buttons on your steering wheel or door panel, or on your central console that can only be disarmed by entering the correct pin code configuration, it is this feature that makes the Ghost difficult to break.

Its sleek and discreet design allows it to be seamlessly into your car without the need for additional keys or LED indicators. It functions independently of the factory tracker or alarm. It's a CAN-bus immobiliser, which means it sits in the vehicle's control network and doesn't interfere with existing devices such as your vehicle's key fob or alarm.

This unique technology isn't easily detected by thieves, unlike other systems that use codes and RF scanning. It only sends a series of pin codes that are silently transmitted through the buttons on your car's steering wheel, door panels, or central console. The Ghost is a groundbreaking product that safeguards your vehicle from keyless entry theft and smart key theft. It does this by creating a unique pin code, that must be entered in order to disarm the device.

The number of vehicles that have no keyless entry on the road is increasing. Thieves are becoming sophisticated and are using devices to clone your vehicle which can be bought through classifieds or online for less than PS15. The cloned key fob can be used to gain access to the vehicle. The standard immobiliser will only stop the car from starting if the criminal has the original key fob. This is not enough protection and it's very easy for criminals jam or spoof signals to unlock the vehicle.

Valet mode

An immobiliser that is standard on your vehicle has an electronic chip that transmits the signal when you hit your key fob button, the system then searches for the specific code that was that is sent by the key to start the car. If the correct signal cannot be detected the system will cut off the power and prevent the vehicle from beginning. This is the basic principle behind all immobilisers for cars that are aftermarket. It's a crucial step to protect your vehicle from being taken away, even if someone has your keys or an accessory that can enhance the signal of your key fob.

However, a ghost immobiliser does not just stop it however, it goes far beyond that. The system, which is located on the CAN bus of your Mercedes is programmed with a unique PIN push sequence that must be entered in order to start the vehicle. It is then secured on your app, and no one will ever be able to access it unless they have the exact pin number that you have.

The system will also stop signal jamming, cloning and hacking (which thieves could employ to bypass the immobiliser on your vehicle). If a burglar gets their hands on your keys to your car or fob, they will not be able to start your car even if it is parked nearby. They may only be able to steal your car on the flatbed truck and that's highly unlikely.

Valet mode is a standard feature with your ghost immobiliser. When it is activated the car's glove box and trunk will be locked, so that anyone stealing your car won't have any personal belongings to take with them. It will also restrict the speed of your Tesla to ensure that it cannot be driven over 70mph and disables ludicrous mode. It will also hide your home and work addresses and make your driver profiles secure, and lock your Tesla dashboard so that no one else is able to access the private data.

If you would like to make use of your car for valet parking or service purposes, simply select the 'Valet/Service' option on your dashboard application and then enter your 4-digit valet pin on the touchscreen. After you've done this, the alarm functions will be removed however, it will prevent you from starting your car until a valid pin has been entered. This is ideal for those who need to give their vehicle to others, like taxi drivers or garage mechanics.

The first aftermarket immobiliser for CAN buses

The Autowatch Ghost provides unparalleled security and is the first aftermarket CAN-bus immobiliser in the world. It safeguards you from key cloning and hacking and even theft of keys. This is accomplished through a partnership with your vehicle's current interface. It doesn't require additional remotes or fobs, but instead is integrated into the vehicle's CAN data network. This makes it a 'stealth' device.

The device is an invisible circuit board that connects to your car's engine management system (ECU) and operates in a silent manner. Once activated, it will prevent the car from starting unless a PIN is entered. This is a unique code you will receive when you book an installation. This number is required to activate valet mode, disable the alarm, or allow you to leave in your friends car (if they have a Ghost installed too).

It is designed so that it cannot be detected by anyone who is looking at your car's interior. does not send any radio signals, and can only be heard when it's activated. It can be fitted in a car ghost immobiliser variety of locations, making it almost impossible to spot. It is also low-maintenance and can be used in combination with other anti-theft systems, such as trackers (Brand dependent), to provide an all-inclusive solution.

Many people choose to install an immobiliser ghost because they believe that the standard security measures aren't enough to protect their pride and joy. While physical deterrents such as locking the steering wheel and wheel clamps are an excellent option, they're not really considered "theft proof" by thieves as they can be beaten easily using the proper tools. A ghost immobiliser can't, however, be beaten by a burglar as it is covertly integrated within the vehicle and if activated, it will shut down the components like the starter motor or fuel system.

Ghost immobilisers are installed for only PS450 - less than what other products cost. It also helps stop your vehicle from being stolen. If you're looking to provide an extra layer of security to your pride and joy Contact us today so we can book it in for you. We accept card payments and offer a 3-month credit that is interest-free through Klarna.

Leave a Reply

Your email address will not be published. Required fields are marked *